To find the right Consumables for your Printer use the search below with your Printer Model or Cartridge Part # .
The HyperX ProCast Condenser XLR Microphone is a professional-grade condenser microphone with an XLR connection, built to capture more details in your recordings with its large diaphragm condenser capsule. Featuring an included anti-shock mount and snap-on HyperX Shield pop filter to reduce rumbles and pops. Its switchable 80Hz high-pass filter and cardioid polar pattern reduce unwanted background noise. The stylish ProCast is compatible with most arms and stands, an easy way to take your streaming or recording setup to the next level.
Large condenser for excellent noise performance
ProCast’s design enables better high-frequency details compared to electret and dynamic mics and improved low-frequency performance over smaller diaphragm condensers.
Cardioid polar pattern for solo recording
The cardioid polar pattern emphasizes sounds in front of the mic, making it perfect for voiceovers, streaming, vocals, podcasts, or other single-source audio recording.
Professional-grade XLR Connection
The ProCast requires 48V of phantom power, so connect it via XLR cable to professional interfaces or preamps to start your recording.
Detachable HyperX Shield metal pop filter included
Simply snap the HyperX Shield to the ProCast’s included anti-shock mount to filter out those plosive puffs of air that result from p sounds.
Built-in anti-vibration shock mount
Isolate the mic and suppress the sound of unintentional rumbles and bumps with the elastic rope suspension.
Fine-tune your audio recordings
ProCast’s switchable 80Hz filter helps reduce unwanted low-end frequencies like rumbles and vibrations. The passive attenuation allows the mic to handle high sound pressure level sources of audio.
Compatible with most boom arms and mic stands
The versatile mic and adapter fit 3/8-inch and 5/8-inch threaded setups, so it’s compatible with most mic stands or boom arms.
Stunning professional design
The sleek, unique HyperX design blends form and function, making the ProCast as elegant as it is practical.
Element | Gold-sputtered externally-polarized condenser |
Diameter of diaphragm | 1” |
Polar pattern(s) | Cardioid |
Frequency response | 20Hz~20kHz |
Sensitivity | -38± 3dBV (1V/Pa at1kHz) |
Maximum input sound level | 140dBSPL (THD 1%@1kHz) |
Noise (RMS) | -118dBV (A-weighting) |
Dynamic range | 123dB |
Signal-to-noise ratio | 75dB |
Output Impedance | 16 ? |
Phantom power requirements | 48V DC, 3mA typical |
Shock mount | Built-in |
Pop Filter | Metal, snap-on |
Connection type | Balanced 3-pin XLR male |
Passive attenuation device (PAD) | -10dB |
High-pass filter | -3dB@80Hz, -12dB/Octave |
Weight (Microphone) | 376g |
Weight (Shock mount and pop filter) | 127g |
Total Weight | 503g |